AKA Sequins Patch

**ONE PATCH PER ORDER**

Sequins Sheild Patch.

Size: 10h x 10w

This patch will make an excellent addition to add on to Camo Jacket, Jean Jacket, Varsity Jacket, Sweatshirts, or Travel Bag.  The possibilities are endless.  
Perfect for :

Varsity Jacket
Varsity sweaters
Sweatshirts
Crewneck
Jean Jackets
Tshirts

Pressing Directions

You can create a fabulous design within minutes, with your heat press or iron. Let’s get started. 

Heat seal to polyester/cotton fabrics. Do not apply to rainwear (waterproof), highly elastic, rayon, nylon or tri-acetate fabrics. Once applied, applique is permanently attached to the garment and is washable, dryable and dry cleanable. For machine washing, turn garment inside-out before washing and drying.

Iron on instructions for embroidered patches using an iron:

Step 1: Set your iron at the hottest temperature setting. DO NOT USE STEAM DURING APPLICATION!

Step 2: Place embroidered patch in the desired position and place a Teflon sheet on top or pillowcase (Teflon Sheet is best).

Step 3: Press the iron straight down for 35-45 seconds with as much constant pressure as possible. NO BACK AND FORTH.

Step 4: Turn the garment inside-out and repeat steps 2 & 3.

Step 5: Allow the patch to cool down.

Instructions for using a Heat Press:

Step 1: Set your heat press to 350 degrees.

Step 2: Place your embroidered patch in the desired position and place a Teflon sheet on top.

Step 3: Press the garment for 12 seconds.

Step 4: Increase temperature to 375 degrees. Turn the garment inside-out and press for 10 more seconds.